不同含量低污染水对人工湿地中细菌的影响研究

探究水平流人工湿地(HFCW)系统处理低污染水过程中,相同COD/ρ(TN)下不同碳氮含量对细菌群落结构的影响。结果表明,进水为较高碳氮含量的HFCW(HF1)和进水为较低碳氮含量的HFCW(HF2)对COD和TN的去除效率具有一定的差异,HF1和HF2对COD的去除效率分别为48.26%和28.89%,对TN的去除率分别为79.06%和81.87%。HF1中细菌的丰富度和多样性均高于HF2,HF1中富集的优势细菌为Chloroflexaceae、Comamonadaceae和Rhodocyclaceae,均具有异养反硝化功能,HF2中富集的优势细菌为Xanthomonadaceae和Rhodocyclaceae,其中Xanthomonadaceae具有自养反硝化功能。COD、NH4^+-N和NO3^--N对HF1中细菌群落的影响大于对HF2中细菌群落的影响,HF1中COD对细菌群落的影响大于NH4^+-N和NO3^--N。     

生物质纤维和改性木质素对聚乳酸结晶性能的影响

采用改性木质素(MZS)作为成核剂,生物质纤维(BF)作为增强剂,通过双螺杆挤出机制备了生物降解的聚乳酸(PLA)/BF/MZS材料。采用差式扫量热仪(DSC)、电子万能试验机和扫描电子显微镜(SEM)分析了BF和MZS对PLA材料性能的影响。结果表明,BF和MZS有效提高了PLA的结晶能力和力学性能。当BF和MZS的含量分别为15%和1%时,PLA材料结晶度提高至67.1%,在50℃/min降温速率下仍具有较高的结晶能力。105℃等温结晶时,15%BF和1%MZS的PLA材料半结晶时间降低至9.0 s,比纯PLA缩短了72.2%。当PLA含有3%BF和1%MZS时,拉伸强度和冲击强度分别为70.1 MPa和7.4 kJ/m^2,比纯PLA分别提高了7.8%和10.4%,根据SEM显示,当BF含量为3%时,在PLA材料中分布较均匀。     

Effect of lanthanum doping on water content and diffusion properties of corundum for producing transparent ceramics

The effect of doping corundum with lanthanum on the content of water and other gas impurities, on the diffusion characteristics, on the unit cell size and static strength of fine-crystalline corundum synthesized under thermovapours conditions in a supercritical water fluid was studied.Content, release and diffusion coefficients of water and other volatile impurities in corundum were measured by kinetic thermodesorption mass spectrometry. Water is the main volatile impurity in fine-crystalline corundum. It was found that the introduction of lanthanum into the structure of corundum reduces several times the content of water and other gas-liquid impurities. An increase in the diffusion coefficient of water during the doping of corundum with lanthanum leads to an increase in the degassing rate of fine-crystalline raw materials. When doping corundum, lanthanum, being localized in structural defects, not only displaces structural hydroxyl groups with the formation of strong aluminate-like bonds, but also decreases in the unit cell and increases in the average static strength of the crystals. La-doped corundum, due to the reduced content of water and other gas impurities, is a promising raw material for the production of transparent ceramics.     

2,4-Dichlorophenol molecularly imprinted two-dimensional photonic crystal hydrogels

A novel molecularly imprinted two-dimensional (2-D) photonic crystal hydrogels (MIPH) for sensitive and label-free recognition of 2,4-dichlorophenol (2,4-DCP) was prepared. The 2-D photonic crystal template was fabricated by using air-water interface self-assembly method. And then the template was embedded with molecularly imprinted polymer, which was synthesized with 2,4-DCP as imprinted molecules, dimethyl sulfoxide as solvent, acrylic acid and acrylamide as functional monomers, N,N-methylene bis acrylamide as cross-linker, azobisisobutyronitrile as initiator. The imprinted molecules were removed by 0.01 M ammonia solution. The results indicated that the 2,4-DCP molecularly imprinted 2-D photonic crystal hydrogels has good response and recognition ability to 2,4-DCP. When the molar ratio of cross-linking density of MIPH is 2.3% and the molar ratio of imprinting molecule is 5.0%, the change of Debye ring diameter is the largest. The diameter of Debye ring increased by 7.1 mm when the concentration of 2,4-DCP changed from 0 to 1 × 10⁻⁶ M, and the particle spacing of MIPH reduced 38 nm. In addition, the diameter of the Debye ring hardly changed in the solution of analogues of 2,4-DCP such as, phenol, 2-chlorophenol, 2,4,6-trichlorophenol and so on, indicating that the MIPH has highly sensitivity and specificity.     

基于加权法的砾类土含水率检测

砾类土在工程建设中有着广泛的应用,其含水率是一项非常重要的指标,但现有测试方法耗时较长。以砂砾石料的砾类土为试验对象,基于加权法思想,将饱和面干含水率替代法和虚拟比重法进行结合,开展砾类土含水率快速检测方法的研究,并对现有的饱和面干含水率测定操作进行一定的改进和优化。采用多种数学方法(绝对误差、均方偏差平方和,相关曲线的相关系数和F显著性检验分析法)对加权法和烘干法的结果进行对比分析。通过试验统计数据分析,证实加权法与烘干法的测定结果基本一致。该分析结果为现场土料含水率快速测定提供了一种新的思路和手段。     

3D Microstructures of Liquid Crystal Networks with Programmed Voxelated Director Fields

The shape-shifting behavior of liquid crystal networks (LCNs) and elastomers (LCEs) is a result of an interplay between their initial geometrical shape and their molecular alignment. For years, reliance on either one-step in situ or two-step film processing techniques has limited the shape-change transformations from 2D to 3D geometries. The combination of various fabrication techniques, alignment methods, and chemical formulations developed in recent years has introduced new opportunities to achieve 3D-to-3D shape-transformations in large scales, albeit the precise control of local molecular alignment in microscale 3D constructs remains a challenge. Here, the voxel-by-voxel encoding of nematic alignment in 3D microstructures of LCNs produced by two-photon polymerization using high-resolution topographical features is demonstrated. 3D LCN microstructures (suspended films, coils, and rings) with designable 2D and 3D director fields with a resolution of 5 µm are achieved. Different shape transformations of LCN microstructures with the same geometry but dissimilar molecular alignments upon actuation are elicited. This strategy offers higher freedom in the shape-change programming of 3D LCN microstructures and expands their applicability in emerging technologies, such as small-scale soft robots and devices and responsive surfaces.     

优化作业方式提高始极片质量

针对某厂铜电解种板工序存在的始极片质量波动较大的问题,从种板系统体积控制和添加剂匹配的角度出发,分析各种因素对始极片质量的影响,做出了相应的改进措施,使种板系统运行更加稳定,始极片质量得到进一步提升。     

稀土石膏常压酸化法制备硫酸钙晶须的研究

以含稀土的石膏为原料运用常压酸化法合成硫酸钙晶须,探讨了不同工艺条件对生成的硫酸钙晶须形貌的影响,同时还考察了晶型助长剂的种类和晶型助长剂的含量对硫酸钙晶须生长的影响,利用SEM和XRD分别对硫酸钙晶须的表面形貌、物相特征做了表征分析。实验得到制备硫酸钙晶须的最佳的反应条件：稀土石膏质量浓度为0.22 g/mL、反应时间为25 min、盐酸浓度为2.8 mol/L、反应温度为70 ℃、陈化时间为4 h,在此条件下合成的硫酸钙晶须平均长度为61 μm,平均长径比为30.5;通过对比实验选出了CuCl₂作为促进硫酸钙晶须生长的助长剂,在添加5%（质量分数）的CuCl₂的情况下可使硫酸钙晶须长径比从30.5增至41,长度从61 μm增至81 μm。     

沿海地区紫菜中总砷含量及砷形态分析

建立高效液相色谱-氢化物发生-原子荧光光谱(HPLC-HG-AFS)联用法分析紫菜中4种砷的形态。在优化仪器参数的基础上,采用正交试验法分析样品前处理中的酸浓度、萃取温度和超声时间对砷提取量的影响。当硝酸浓度0.15 mol/L、萃取温度80℃、超声时间1 h时,萃取效果最佳。对低、中、高3个水平进行方法验证,砷形态的回收率为84.0%~113.6%,精密度为1.3%~4.6%,结果显示,沿海地区的紫菜产品中总砷含量高,但有毒砷占比小。方法快速高效,可用于测定紫菜中砷形态的含量。